Our in-house lighting specialists developed this LED strip kit with you in mind. Each kit includes everything you need for simple, stress-free installation and use. Use solderless clamps to quickly and safely connect segments of LED strip tape without the hassle of wire stripping or splicing. Long-lasting 3Mâ„¢ adhesives ensure easy mounting to virtually any surface. Adjust brightness and switch between dynamic modes with the ultra-slim wireless RF remote. COB strips produce a seamless line of light with no visible hotspots, making it ideal illumination for reflective surfaces such as granite countertops and tile floors. This LED strip kit is perfect for a variety of lighting applications, including under-cabinet illumination, ambiance lighting, and toe-kick accent lighting.
What's Inside:
(1) 5m Single-Color LED COB Strip Light - 24V
Available in: 2200K, 2700K, 3000K, 4000K, 5000K, and 6500K
(1) Single Color LED Controller with Dynamic Modes - RF Remote
(1) 60W DiodeDrive® AC Power Adapter
(1) Standard Barrel Connector to Screw Terminal Adapter
(10) 22 AWG Two Conductor Power Wire
(2) Two Conductor Quick Connect Terminal Blocks
(14) Solderless Clamp-On Pigtail Adapters
(2) 3Mâ„¢ Double-Sided Foam Pads
Specifications
Certifications/Compliance:UL Listed, RoHS Compliant
CRI :90+
Current Draw:2.08A (2080mA)
Current Draw per Foot :127mA
Dimmable:Yes
Environmental Rating:Non-weatherproof
Finish:White
Input Connection Type:Pigtail
LED Beam Angle :180 degree
LED Density:156 LEDs/ft.
LED Type:COB (chip-on-board)
LEDs per Segment:32
Length:16.4ft (5m)
Max Run :Up to 16.4ft (5m)
Minimum Cut Length:62.5mm (2.46in)
Operating Voltage:120 VAC
Power Consumption:50 Watts
Rated Life (L70):30000 Hours
Series:COB
Strip Width:8mm (0.31in)
Wattage per Foot:3.1 W/ft (10.2 W/m)
Wire Length:508mm (20in)
